NerdKits - electronics education for a digital generation

You are not logged in. [log in]

NEW: Learning electronics? Ask your questions on the new Electronics Questions & Answers site hosted by CircuitLab.

Support Forum » Schematics for project in manual?

July 04, 2009
by Figment
Figment's Avatar

Are the full schematics available for the different incarnations of the temperature project in the manual? One thing I was hoping to get better at was translating schematics into actual circuits. Having both the schematic and the circuit available would be very beneficial.

The schematics I was most interested in are:
1) When you first power on the circuit, before you add the temperature probe.
2) The schematic when the probe is in place.
3) And the schematic from when you rearrange the circuit to add the dip switch.


Post a Reply

Please log in to post a reply.

Did you know that interrupts can cause problems if you're not careful about timing and memory access? Learn more...